illbruck Trio functional tape TP655 ML-TECH ECO

illbruck Trio TP655 ML-TECH ECO functional tape

Advantages of TP655 multifunctional tape

Excellent driving rain resistance and air tightness
Easy installation
3-layer foam structure
Joint depths: 66 and 77 mm
Length: 12 m

Secure Delivery

Your order will be delivered securely to the agreed delivery address.

Shipping

All accessories and care products are packaged and transported safely.

Warranty

Your accessory is covered by a 2-year warranty.

Product Information

Joint Sealing Tape for Professionals and DIY Enthusiasts

The illbruck Trio TP655 ML-TECH ECO functional tape is a pre-compressed, multifunctional sealing tape designed to seal perimeter joints around windows and doors. The tape is easy to apply, making it suitable for both DIY enthusiasts and experienced installers.

Technical Specifications at a Glance:

Manufacturer: illbruck
Product: Trio TP655 ML-TECH ECO functional tape
Material: Impregnated polyurethane (PU) foam between two airtight foam layers
Colour: Anthracite
Classification: MF1 according to DIN 18542

Resistance to driving rain: Up to 900 Pa, according to DIN EN 1027
Reaction to fire: Class B1 (flame-retardant, according to DIN 4102-1)
Application temperature: +5 °C to +25 °C
Temperature resistance: −30 °C to +80 °C
Storage conditions: Store the rolls horizontally in their original cartons in a dry environment at temperatures between +1 °C and +20 °C, protected from direct sunlight.

Characteristics

Reliable Sealing of Window and Door Perimeter Joints

When installing windows and doors, perimeter joints must be properly sealed against moisture and draughts. The illbruck TP655 performs several functions at once: it protects against driving rain, reduces air leakage and contributes to thermal and acoustic insulation around the frame.

Thanks to its MF1 classification, the multifunctional sealing tape meets the requirements for high-performance joint sealing.

With driving rain resistance of up to 900 Pa, the tape is also suitable for window and door joints exposed to demanding weather conditions.

The tape is also easy to apply and does not need to be positioned in a particular direction.

Its three-layer foam structure provides a reliable airtight seal between the window frame and the surrounding wall.

Please note: When selecting the tape, make sure you choose the correct tape width and a suitable joint width range. The tape will only seal properly if you choose the right size for your window or door.

Installation

Easy Installation and Reliable Sealing

The illbruck TP655 TRIO ML-TECH ECO functional tape is easy to apply thanks to its self-adhesive backing and flexible foam structure. It does not need to be positioned in a specific direction. Follow these steps to ensure effective sealing of window and door perimeter joints:

Measure the joint width and the depth of the window frame to select the correct tape size. Remove any dust, dirt and mortar residue from the window reveal. Any significant unevenness should be repaired using a suitable mortar.

Remove the outer protective film from the roll and cut off the first 2 cm of tape. Cut a separate length of tape for each side of the frame, leaving the required extra length at the corners.

Apply the TP655 tape along the outer edge of the window frame, ensuring it is free from creases. Position it approximately 1–2 mm back from the outer face of the frame. For vertical joints, preferably start at the bottom and work upwards. Do not bend the tape around the corners. Instead, cut separate pieces and press their ends firmly together at each corner.

Immediately after applying the tape, position the window in the wall opening and secure it using suitable fixings.

Important: Where frame fixing screws are required, drill through the tape to prevent it from wrapping around the screws.

The pre-compressed sealing tape expands after installation to fill the joint and conform to its edges. Pay particular attention to corners, the points where the tape ends meet and fixing points. Any gaps must be sealed using a suitable sealing product.

The application temperature must be between +5 °C and +25 °C. At low temperatures, the rolls should be stored at room temperature for at least six hours before installation.

Over 500,000 Satisfied Customers and Counting

Residential building

Russ DriveNew Zealand

Composite windows and doors for a passive house

“The windows from windows24.com meet all of our criteria for design, energy efficiency and high quality. These made-to-measure products are a perfect match for our passive house.”

Residential building

DonvaleAustralia

uPVC sliding doors

“The expert team supported us throughout the process: realising our ideas, choosing long-lasting materials, and sorting the shipping from Germany to Australia.”

Residential building

ArizonaUSA

uPVC windows and doors

“Great customer service! The professional advice from the windows24.com-team helped us choose the ideal products for situation.”

Residential building

PeppertreeAustralia

Special window shapes

“windows24.com delivered windows to us that perfectly fit to the design of our house. These are no standard windows! We were surprised by how exactly we could define the shape of each window.”