Front door Tampa
Always in action, permanently on call – front doors have a lot to put up with: from regular daily use through changing weather conditions to repelling the attack of “blunt instruments”. Front doors made of PVC in the Tampa model group can master all these requirements, not least due to the integrated steel reinforcement. Additionally there is the unbeatable price-performance aspect. Certainly this is true for the Tampa model, a front door which stands out with its clear and tidy design.
Their prices were far lower than the competition.
My order was delivered on time and exceeded my expectations!
Whether made from wood, aluminium or PVC: front doors must always be well insulated. In the case of the PVC front door Tampa this is enabled by way of a reinforced steel core. It resists any possible bending due to long hot weather periods and this model door is also available in two profile types.
The version Ideal HT4000 consists of a 4-5 chamber system with flattened glazing bead and a maximum glass thickness of 41mm. With ten millimeters more and a 5-6 chamber system with angular glass beading is offered as die version Ideal HTplus.
Both door profiles consist of steel stiffeners in sash and frame cladding as well as aluminium sills with thermal separation. This is the answer to the ever increasing prices for energy – sustainability begins at home. Further extras for PVC front doors are available for the areas security and design.
Hence, as well as classic white all colours included in the RAL colour range are available. And if you have general questions regarding options, cost or door fitting advice is available at our free hotline (0049 711 860 601 17).
Entrance door Model Tampa with its classic but modern look and three square glass panels, is available in multiple colour variants.
aluplast HT4000 HTplus
|Model Tampa||uPVC Entrance door||from 76 cm||from 188.5 cm|
White, mahagony, golden oak,
walnut, gray, anthracite
from € 1490.00